Preliminary Design on Automatic Production Line of High-frequency Induction Welding Light Gauge H-beam

Abstract

The automatic production line of high-frequency induction welding H-beam is preliminarily designed, which is applied to produce the H-beam of the web plate with the height less than 100mm. In the first place, the technological process for the whole production line is framed based on the principle of the HF induction welding. Subsequently, the scheme design is conducted by dividing the production line into pre-welding processing, HF induction welding and post-welding processing. Finally, the software SolidWorks is applied to design the virtual prototype which consists of the feature modeling of the parts and the virtual assembly of the machine, and carry out the motion simulation in order to check the interference and movement coordination of mechanisms. process provides an effective basis and good guidance for the succeeding design of the production line.